Clipsal - 56 Series Surface Switch1 Gang, 2 Pole, 500VAC, 20A, Reversing and Changeover Grey

The 56 Series Surface Switches are available from 250 V, 10 A to 500 V, 63 A.

They incorporate a positive, rotary switch action.

The ‘ON’ and ‘OFF’ positions are clearly marked and there is provision for two padlocks.

Hole diameter is 8 mm. If locking is required in the ‘ON’ position, simply drill a hole where necessary.

To provide easier wiring of our 56 Series Three Pole 63 A Switch, a deeper two gang enclosure and centrally mounted option (Cat. No. 56SW363/2), allows additional room for wiring associated with this application.

Earth and neutral connectors accommodating 3 x 6 mm2 cables are supplied with all products above 20 A.

All 63 A switches come with the facility to fit auxiliary micro switch 56SWAUX15.

Note:

-   AC utilisation categories to AS/NZS3947.3, Ithe- Conventional Enclosed Thermal Current, Ie - Operational Current,  Ui - Insulation Voltage, Ue - Operational Voltage. - 

-   For Fluorescent Loads use 56SW110HD or 56SW115HD instead of 56SW110 or 56SW115.

Less Enclosure versions are indicated with the letters LE in the reference.

Changeover and Reversing Switches are designed to give full motor control in a unit that is rated IP66.

These 56 Series are housed within single modules as part of the overall modular concept of the range.

Earth and neutral connectors accommodating 3 x 6 mm2 cables are provided with all models.